The Belle Isle gas turbine was installed in 1949 and was the first gas turbine built in the United States for the purpose of generating electric power. Its low cost and consistency aroused considerable interest in the electric utility industry, both here and abroad.
1949
In 1942, University of California, Davis (UCD) biologist, Jack Hanna recognized the need for breeding tomato varieties that ripen uniformly and withstand the rigors of mechanical harvesting. In 1949, UCD agricultural engineer Coby Lorenzen and Hanna began developing a mechanical tomato harvester. Parallel efforts by others, notably those started in 1957 by agricultural engineer Bill Stout and horticulturist Stan Ries of Michigan State University, eventually resulted in several different harvesting mechanisms. In the late 1950s, UCD agricultural engineer Steven J.
YearAdded:
2005
Developed by Rohm and Haas in the 1940s, water-based acrylic emulsion technology filled a need for easy-to-use household paints for a growing suburban population in the United States following World War II. This aqueous technology required less preparation to use, was easier to clean up, had less odor, and performed better than or equal to paints made with solvents. It was also a leap forward in acrylic chemistry.
YearAdded:
Image Credit: Courtesy Flickr/United Soybean Board (CC BY 2.0)Image Caption: From plastics to paints it changed our world2008
On April 21, 1949, a completely outdoor turbine-generator was placed into commercial operation at the Greens Bayou electric power plant--the first fully outdoor unit to operate in the United States. The demand for unprecedented quantities of electricity after World War II pressed utilities to provide addition power quickly. The outdoor design, unlike the traditional large turbine hall, resulted in significant reductions in the cost per kilowatt to build the plant.
YearAdded:
Image Credit: Courtesy ASMEImage Caption: Greens Bayou Generator PlantEra_date_from: 1949
1991
The Garfield Thomas Water Tunnel is a unique experimental facility for hydrodynamic research and testing. The 48-inch (1.2-meter) diameter water tunnel enables the research staff to conduct basic and applied investigations in the fields of cavitation, hydroacoustics, turbulence, transition, hydrodynamic drag, and hydraulic and subsonic turbomachinery. Instrumentation and testing methods have been developed to study noise, vibration, vehicle dynamics, and the interaction between the propulsor and vehicle body.
YearAdded:
Image Credit: Courtesy WikiCommons/CyberXRef (CC BY-SA 3.0)Image Caption: Entrance to the Garfield Thomas Water TunnelEra_date_from: 1949
1996
This unit, retired from the Belle Isle Station of the Oklahoma Gas & Electric Company, was the first gas turbine to be used for electric utility power generation in the United States. It represents the transformation of the early aircraft gas turbine, in which the engines seldom ran more than ten hours at a stretch, into a long-life prime mover. This redesign was based upon creep-rupture tests of S-816 cobalt-base alloys for turbine buckets. The low-cost trouble-free service led to wide-scale adoption of the gas turbine, over 45 million kilowatt capacity (over 9 percent of U.S.
YearAdded:
Image Credit: Image Courtesy of ASMEImage Caption: Belle Isle Gas Turbine on static display in Schenectady, New YorkEra_date_from: 1949
1984
The growth of the shrimp processing industry and its impact on local economies along the northern Gulf of Mexico, The U.S. West Coast and in more than forty other countries is largely attributable to the “machine that peels shrimp,” invented by sixteen year old James Martial Lapeyre from Houma, Louisiana,.
The current Laitram Machinery Model A Automatic Shrimp Peeler is virtually identical to the first unit that was put into commercial use in 1949. Each machine peels approximately 1,000 pounds of shrimp an hour, ranging in size from 10 to 200 count per pound.
YearAdded:
Image Credit: Courtesy ASMEImage Caption: Lapeyre Automatic Shrimp Peeling MachineEra_date_from: 1949
2004
Innovations
The growth of the shrimp processing industry and its impact on local economies along the northern Gulf of Mexico, The U.S. West Coast and in more than forty other countries is largely attributable to the “machine that peels shrimp,” invented by sixteen year old James Martial Lapeyre from Houma,… Read More
This unit, retired from the Belle Isle Station of the Oklahoma Gas & Electric Company, was the first gas turbine to be used for electric utility power generation in the United States. It represents the transformation of the early aircraft gas turbine, in which the engines seldom ran more than… Read More
The Garfield Thomas Water Tunnel is a unique experimental facility for hydrodynamic research and testing. The 48-inch (1.2-meter) diameter water tunnel enables the research staff to conduct basic and applied investigations in the fields of cavitation, hydroacoustics, turbulence, transition,…
Read More
On April 21, 1949, a completely outdoor turbine-generator was placed into commercial operation at the Greens Bayou electric power plant--the first fully outdoor unit to operate in the United States. The demand for unprecedented quantities of electricity after World War II pressed utilities to…
Read More
Developed by Rohm and Haas in the 1940s, water-based acrylic emulsion technology filled a need for easy-to-use household paints for a growing suburban population in the United States following World War II. This aqueous technology required less preparation to use, was easier to clean up, had…
Read More
In 1942, University of California, Davis (UCD) biologist, Jack Hanna recognized the need for breeding tomato varieties that ripen uniformly and withstand the rigors of mechanical harvesting. In 1949, UCD agricultural engineer Coby Lorenzen and Hanna began developing a mechanical tomato…
Read More
The Belle Isle gas turbine was installed in 1949 and was the first gas turbine built in the United States for the purpose of generating electric power. Its low cost and consistency aroused considerable interest in the electric utility industry, both here and abroad. This led ultimately to the…
Read More